General safety precautions

When installing, operating, and maintaining all series of AC servo drives in our company, the safety precautions introduced in this section should be followed.

All safety precautions

To ensure personal and equipment safety, please follow all safety precautions indicated on the equipment and in the manual when installing, operating, and maintaining the equipment. The "Caution", "Warning", and "Danger" items in the manual do not represent all safety precautions that should be followed, but only serve as supplements to all safety precautions.

Local regulations and norms

When operating equipment, local regulations and norms should be followed. The safety precautions in the manual are only a supplement to local safety regulations.

Basic installation requirements

The personnel responsible for installing and maintaining our company's products must first undergo strict training, understand various safety precautions, and master the correct operating methods before installing, operating, and maintaining the equipment:

• Only qualified or trained personnel are allowed to install, operate, and maintain equipment；
• Only qualified professionals are allowed to dismantle safety facilities and maintenance equipment；
• The replacement and modification of equipment or components (including software) must be completed by personnel certified or authorized by our company；
• Operators should promptly report any malfunctions or errors that may cause safety issues to the person in charge.

Grounding requirements

The following requirements are only applicable to equipment that requires grounding：

• When installing equipment, it is necessary to first ground it before dismantling the equipment, remove the ground wire at the end；
• Prohibit damaging the grounding conductor；
• Prohibit operating equipment without installing grounding conductors；
• The equipment should be permanently connected to ground. Before operating the equipment, the electrical connections of the equipment should be checked to ensure reliable grounding.

Equipment safety

• Before operation, the equipment should be reliably fixed on an electrical cabinet or other stable object, such as a desktop or floor;
• When the system is running, do not block the ventilation openings；
• When installing equipment, if screws need to be tightened, tools must be used for operation；
• After installing the equipment, please remove any empty packaging materials from the equipment area