Factonation
FactonationFactonation
สินค้าคู่มือติดต่อ
ติดต่อเรา

Mechanical safety

Introduce safety precautions for motors, drilling, fans, and handling heavy objects.

Motor

-s-zhongdaweixianyuan

  • Poor insulation of electric motors can damage equipment and even endanger life safety.

Please use insulated motors of Class B or above, otherwise there is a risk of electric shock.

Drill hole

tishi_2

  • Drilling holes that do not meet the requirements can damage the driver cable, and the metal chips generated by drilling entering the servo driver can cause a short circuit on the circuit board.

Before drilling holes on the cabinet, the cables inside the cabinet should be removed first.

Strictly prevent metal chips from falling into the interior of the AC servo drive. After drilling, the metal chips should be cleaned in time.

Fan

tishi_2

  • Improper operation of the cooling fan at high speed can cause equipment damage.

When replacing components, pay attention to placing components, screws, tools, and other objects properly to avoid falling into the running fan and damaging the fan or equipment.

carry

jinggao_1

  • When handling heavy objects, preparations should be made for load-bearing to avoid being crushed or twisted by heavy objects.
  • Please wear protective gloves when handling the drive to avoid scratching your hands.
  • When handling heavy drives, please keep your back straight and move smoothly to avoid sprains.
  • When removing the drive from the electrical cabinet, the bottom edge of the drive should be supported instead of the panel or power terminal.