1. Overview of Monitoring and Debugging Functions
After successfully establishing communication between the programming device running our software and downloading the program to the PLC, the monitoring and debugging functions can be used.
2. Start monitoring#
Click toolbar button
or“tool”(Tool) menu bar“monitor”(Monitor) button
，start communication with the PLC and enter the monitoring PLC state.
3. finish monitor#
In monitoring mode, click the monitoring button again to stop monitoring.
อ่านเพิ่มเติม
อุปกรณ์ที่ใช้กับคู่มือนี้
2 รายการ
