1. Monitor status using a watchlist

You can create one or more monitoring lists to monitor and debug program operations after downloading the program to the PLC. Open a list to view or edit its contents. Status information will be collected while monitoring.

Open the watchlist using one of the following methods:

In the "Windows" area of the "View" menu, select "Monitor list" from the "Windows" drop-down list.

Open Watchlist with Menu

• Click the button in the toolbar of the Engineering Resource Manager。

• After entering monitoring mode, it will automatically restore the state before the last monitoring was turned off. This status defaults to opening the watchlist.

If there are multiple monitoring lists in the project, use the tabs at the bottom of the Monitor list window to move between the charts.

图1 Tab

If you have already opened an empty status chart, edit the chart rows to add the PLC data addresses you want to monitor.

The status chart window can be floated or parked in any position.

Refer tomonitor list