1. PLC switches between RUN and STOP
1.1. switch PLC operation mode#
Use the following method to change the PLC working mode:
In the "Operation" area of the "Tool" menu, click the "Run" button to enter RUN mode, and click the "Stop" button to enter STOP mode.
图1 Menu
Explanation
To control the RUN/STOP mode through software, communication must be established between software and the PLC. The status LED in front of the PLC indicates the current working mode.
อ่านเพิ่มเติม
อุปกรณ์ที่ใช้กับคู่มือนี้
2 รายการ
