F01 — Motor 1 data
code | Code name | Setting range | value | attribute |
|---|---|---|---|---|
F01.00 | Motor type selection | 0：asynchronous motor 1：frequency motor | 0 | 〇 |
F01.01 | Rated power of motor | 0.1kW ～ 1000.0kW | Mode confirm | 〇 |
F01.02 | Rated voltage of motor | 1V ～ 2000V | Mode confirm | 〇 |
F01.03 | Motor rated current | 0.01A ～ 655.35A | Mode confirm | 〇 |
F01.04 | Rated frequency of motor | 0.01Hz ～max frequency | Mode confirm | 〇 |
F01.05 | Rated motor speed | 1rpm ～ 65535rpm | Mode confirm | 〇 |
F01.06 | Asynchronous motor stator resistance | 0.001Ω ～ 65.535Ω | Tuning parameter | 〇 |
F01.07 | Asynchronous motor rotor resistance | 0.001Ω ～ 65.535Ω | Tuning parameter | 〇 |
F01.08 | Asynchronous motor leakage reactance | 0.01mH ～ 655.35Mh | Tuning parameter | 〇 |
F01.09 | Asynchronous motor mutual inductance reactance | 0.1mH ～ 6553.5mH | Tuning parameter | 〇 |
F01.10 | Asynchronous motor no-load current | 0.01A～F01-03 | Tuning parameter | 〇 |
F01.27 | Number of encoder lines | 1～65535 | 1024 | 〇 |
F01.28 | Encoder type | 0:ABZ incremental encoder 1: UVW incremental encoder 2：Rotating Transformer 3：Sine cosine encoder 4：Line saving UVW encoder | 0 | 〇 |
F01.29 | Speed feedback PG card selection | 0: QEP1 1: QEP2（扩展） | 0 | 〇 |
F01.30 | ABZ incremental encoder AB phase sequence | 0：Forward 1：reverse | 0 | 〇 |
F01.31 | Encoder installation angle | 0.0～359.9° | 0.0° | 〇 |
F01.32 | UVW encoder UVW phase sequence | 0：Forward 1：reverse | 0 | 〇 |
F01.33 | UVW encoder bias angle | 0.0～359.9° | 0.0° | 〇 |
F01.34 | Number of pole pairs for transformer | 1～65535 | 1 | 〇 |
F01.35 | Number of UVW poles | 1～65535 | 4 | 〇 |
F01.36 | Speed feedback PG disconnection detection time | 0.0s：no operation 0.1s～10.0s | 0.0s | 〇 |
F01.37 | Motor parameter tuning | 0：No operation 1：motor static tuning 1 2：Dynamic tuning 3： motor static tuning 2 | 0 | 〇 |