F13 — Basic monitoring data
Code | Code name | Minimum unit |
|---|---|---|
F13.00 | Set frequency (Hz) | 0.01Hz |
F13.01 | Operation frequency (Hz) | 0.01Hz |
F13.02 | Main cable voltage (V) | 0.1V |
F13.03 | Output voltage(V) | 0.1V |
F13.04 | Output current(A) | 0.01A |
F13.05 | Output current(%) | 0.1% |
F13.06 | Output power (kW) | 0.1kW |
F13.07 | Count value | 1 |
F13.08 | Length value | 1 |
F13.09 | AI1 voltage (V) | 0.01V |
F13.10 | AI2 voltage（V）/ current（mA） | 0.01V/0.01mA |
F13.11 | reserve | 0.01V |
F13.12 | Load speed | 1RPM |
F13.13 | DI input status | X5/X4/X3/X2/X1 |
F13.14 | DO output status | R2/Y2/R1/Y1 |
F13.15 | PID set | 1 |
F13.16 | PID feed back | 1 |
F13.17 | PLC stage | 1 |
F13.18 | Input pulse frequency (Hz) | 0.01kHz |
F13.19 | Feedback speed (Hz) | 0.01Hz |
F13.20 | Operation time left | 0.1min |
F13.21 | AI1 calibration front voltage | 0.001V |
F13.22 | AI2 calibration front voltage（V）/ current（mA） | 0.001V/0.01mA |
F13.23 | Keyboard potentiometer calibration front voltage | 0.001V |
F13.24 | Motor speed | 1RPM |
F13.25 | Current power on time | 1min |
F13.26 | Current operation time | 0.1min |
F13.27 | input pulse frequency | 1Hz |
F13.28 | Communication set value | 0.01% |
F13.29 | Encoder feedback speed | 0.01Hz |
F13.30 | Main frequency display | 0.01Hz |
F13.31 | Auxiliary frequency display | 0.01Hz |
F13.32 | View any memory address value | 1 |
F13.33 | reserve | |
F13.34 | Motor temperature value | 1℃ |
F13.35 | Target torque (%) | 0.1% |
F13.36 | Rotation position | 1 |
F13.37 | Power factor angle | 0.1° |
F13.38 | ABZ position | 1 |
F13.39 | V/F Separate target voltage | 1V |
F13.40 | V/F Separate output voltage | 1V |
F13.41 | DI display of input status | 1 |
F13.42 | DO display of output status | 1 |
F13.43 | DI display of functional status 1 (Function 01- Function 40) | 1 |
F13.44 | DI display of functional status 2 (Function 41- Function 80) | 1 |
F13.45 | Fault information | 1 |
F13.46 ~F13.57 | reserve | |
F13.58 | Z signal counter | 1 |
F13.59 | Set frequency (%) | 0.01% |
F13.60 | Operation frequency (%) | 0.01% |
F13.61 | Frequency status | 1 |
F13.62 | Current fault code | 1 |
F13.63 | Point to point master communication sends torque value | 0.01% |
F13.64 | Amount of slave station | 1 |
F13.65 | Torque upper limit | 0.1% |
F13.66 | Communication expansion card mode | reserve |
F13.67 | Communication expansion card version | Display range |
F13.68 | reserve | |
F13.69 | reserve | |
F13.70 | reserve | |
F13.71 | Communication card specific current display | Display range |
F13.72 | Communication card fault status | Display range |
F13.73 | Motor SN | 0：motor 1 1：motor 2 |
F13.74 | Motor actual output torque | -100.0%～100.0% |